RealBat
Корзина 0 0 руб.

JBL Wind. Разборка и замена батареи.

Это батарея для беспроводной колонки JBL Wind

Модель батареи: CS-JMW100SL
Емкость: 800mAh / 2.96Wh
Напряжение: 3.7V
Размеры: 42.50 x 31.20 x 6.00mm
Гарантия: 12 Months

Step 1 - Remove the speaker holding mount
Step 2 - Remove the protective speaker cover
Step 3 - Loosen these screws and open the protective ring
Step 4 - Loosen these screws and open the speaker
Step 5 - Loosen these screws and lift up the circuit board
Step 6 - Resolder these pins
Step 7 - Loosen these screws and remove the battery cover
Step 8 - Remove the original battery
Step 9 - Apply adhesive stripe and install the Cameron Sino battery
Step 10 - Install the battery cover
Step 11 - Solder these pins
Step 12 - Install the circuit board
Step 13 - Install the speaker
Step 14 - Install the protective ring
Step 15 - Install the protective speaker cover

Написать комментарий